Cold Cutting Saw And Live Video

The cold cutting saw machine is mainly used on the welded pipe production line, and the weld pipe is accurately cut off. This device is driven by the servo motor, gives a tube wall. It has the characteristics of low noise and high saw.

1. Square: Two parts: Drag section and sawing head portion A))

DRO section includes: main dragging device, bed, lubrication system, hydraulic station, towline, electric control equipment, operating table, servo system. B))

Siode section

Second. Introduction to the principle of the main work: a) Drag part: Movable saw cars are supported on the bed by linear guide, by servo motors through reduction machine and toothed belt drive train, saw head, fixture, roller, etc. The guide roller is also arranged in front of the saw head, and the horizontal roller and the side guide roller are arranged, respectively, and the horizontal roller can be adjusted up and down, and the side guide roller can be adjusted to be adapted.

Saw head section: It is used to complete the cutting of the steel pipe. The sawing mechanism is: the servo motor passes through the hard tooth surface reducer, through the servo motor, the ball lead screw is realized. The cold cutting saw control system can be widely used for pipe